|
Instructions for Applying Hoof Wraps

Clean hoof thoroughly and treat as recommended by your vet or farrier.
Note position of bandage (hoof side, front and rear)
Position foam pad (secure with flexwrap if desired) and center hoof on
bandage.
Tip: Position hoof in bandage, then pull up all Velcro strips at once
as if you were wrapping a candied apple. Then go back and place your
strips like the numbers show.
Detailed Instructions for Applying Hoof Wraps
Click photos for larger image
STEP 1 - Back Left
Begin with tab # 1 and continue pulling up tabs 1-6 in the correct
order. All tabs should be pressed firmly into position.

STEP 2 - Back Right
Secure tab # 2 to first tab.

STEP 3 - Front Left
Secure tab three.

STEP 4 - Front Right
Tab # 4 is placed over and secured against both tabs 1 and 3.

Hoof Wrap Photo from STEP 4

Click photos for larger image
Pull front tab #5 up and around toward the rear of the bandage. Place
over and secure against all tabs.

Pull rear tab # 6 up and around to the front of the hoof. Pull the rear
straps over firmly and evenly. Press straps down firmly to secure fit.
As with all boots and wraps, use as recommended by your vet or farrier
and be careful not restrict blood flow.

Finished Hoof Wrap
 
[top of page]
|